JEL Ltd

Taiwan - EMC Testing

JEL is one of valuable BSMI accredited EMC test laboratories in Japan. Experienced engineer carries out the test in accordance with CNS standard. After testing, you can use JEL Test report as it is for the application of BSMI certification for any of TA, RPC, and DoC.

Flow of the test

Check the availability of test site
next
Site becomes reserved in first applied, first secured. We recommend early reservation.
JEL Reservation Desk TEL: +81 4 7188 6381
Application for test
next
Please download and fill in the "Application form for EMC Testing", then submit it to the return address as below:
JEL Reservation Desk
FAX: +81 4 7188 6382
e-mail: otoiawase@jel.co.jp
Reservation fixed
next

We will send back a copy to customers with receipt mark stamped. Then the reservation is fixed.

In case you do not receive any confirmation of reservation, please contact to the following address:
JEL Reservation Desk TEL: +81 4 7188 6381

Test
next
EUT is to be prepared by customer on the reserved day, and test is carried out at open site or shielded room. If you are in need of using BSMI certified equipment, please order for our equipment rental service (charged), beforehand.
・Test results exceed the limit value
・Just need EUT shielding
nextFinish of the test
  • Test result within the limit value
nextGo to "Test report ordering procedure"

Test report ordering procedure

Submit Test Report ordering form
next
Please download and fill in the "Order form for Test Report".
If entry method is unclear for you, please do not hesitate to contact JEL testing staff in charge.
Sample Form (At work)
next
space
Submit necessary documents
next
Please refer to the necessary documents list, and provide us with necessary documents for issuing the test report.
Issue of EMC Test Report space

For customers in need of further step to BSMI certification serviceFor customers in need of further step to BSMI certification service

Necessary documents list for BSMI endorsed Test Report

Item Details
Order form for Test Report You can download it from JEL website. It includes applicant's information and technical contents to be stated on the test report.
Product Descriptions in English Product descriptions in English similar to the ones printed on the product brochure is necessary.
Block Diagram Block diagram of test configuration. (not a block diagram of inside of EUT)
List of EUT and Accessories List of EUT and accessories used for the test. (excluding JEL rental equipments)
Cable constructions and termination method (English) Description in English about constructions and termination method of the cables used for test are necessary.
List of cables List of the cables used for test. (excluding JEL rental cables)
Descriptions for modes (English) Operation modes described in English are necessary
Image of EUT (Front & Rear) Photo Image with scale put aside
Image of EUT (Open) Clear photo image on which IC number is legible
Others Applicant information, factory information, etc.

Note for EMI testing for Taiwan

*Power Supply voltage in Taiwan is 110V/220V, 60Hz.

*During the test, BSMI certified (TA/RPC/DoC) peripherals should be connected to all the ports of EUT.

*Power Supply Unit and Power Cable of EUT should be BSMI certified in stand-alone configuration. Therefore customer should use BSMI certified products or should arrange conformity tests for CNS standard, separately. Specifically, please refer to"Recommendation Service of Cable manufacturer".

JEL Applicable CNS Standard

Information Technology Equipment (ITE) CNS 13438 (CISPR 22)
ISM, Electromagnetic Cooker
Microwave oven
CNS 13803 (CISPR 11)
Household appliances, electric tools and similar apparatus CNS13783-1 (CISPR 14-1)

If you are not sure which CNS category the product belongs to, we recommend that you utilize "BSMI confirmation service", which enables you to check with BSMI if the product should be certified or not, by receiving the product specifications prior to the test.

Price information

EMI Testing Fee JPY260,000/day (Open hours 9:00~17:00)*1
BSMI endorsed
Test report issuing Fee
Original JPY30,000/copy Duplicate JPY30,000/copy
Photocopied original JPY3,000/copy PDF(B/W) JPY10,000/report
Shipping charge
of samples
Shipment cost to JEL (Chiba) is on customer's account.
Rental Equipment Fee PC JPY20,000/day
Printer JPY5,000/day
MP3 Player JPY5,000/day
Keyboard JPY3,000/day
Mouse JPY3,000/day
Speaker JPY3,000/day
(All the above are BSMI certified)
Others Overtime rate: JPY40,000/hr. (not 9:00-17:00)
Weight charge: JPY10,000/100kg (additionally charged by every 100kg over 300kg)

*1: JEL Engineer carries out and witnesses the EMI testing in 9:00~17:00. Please note that extra fees will be charged for the time exceeding the normal working hour. For holiday use, 25% of above is additionally charged.

Lead time

For Testing 1 to 2 days*2Refer to the following guideline of lead time
For Reporting 10 days after all the necessary documents are received.*3

*2: Lead time varies by product specifications or number of operation modes, for which please ask the details at reservation. Troubleshooting time for any possible malfunctions of EUT is not included.
*3: It is possible for us to expedite issuing the test report if customer can provide us with the order form for test report and necessary documents before finishing the test procedure.


For details please contact to:
【Reservation Desk】General Service Bureau / Asia Approval Group
TEL: +81 4 7188 6381
FAX: +81 4 7188 6382
e-mail: otoiawase@jel.co.jp